Phoenix gold ZLOC4.4
The ZLOC4.4 is the essential solution for enhancing your vehicle’s audio system. While many vehicles now come with integrated amplifiers, the original OEM system often falls short in terms of performance. Replacing the entire audio system can be costly and sometimes not feasible. That’s where our ZLOC converters step in. Not only do they reduce distortion, but they also allow for seamless integration of aftermarket audio components into your OEM system. Gone are the days of being unable to upgrade your head unit – our ZLOX converters cleverly bypass OEM resistance, all while eliminating unwanted system noise. Upgrade your audio experience today with our advanced OEM integration solution.
The ZLOC4.4 has four high-level inputs that take the speaker signal from the OEM head unit or amplifier and convert it to four low-level outputs. This allows you to add external amplifiers to install an aftermarket subwoofer, add more power or more speakers.
The ZLOC4.4 is equipped with a built-in CLIP indicator that flashes when it senses distortion on the input or output signal. This lets you easily see when the input signal distorts and lets you adjust the output signal without any clipping for a distortion-free signal all the way.
Bass CUBE
Phoenix Gold Bass CUBE is built into the ZLOC4.4. This feature allows you to finely tune the bass level by choosing a centre frequency between 20Hz – 110Hz to a level between -9dB to +9dB with a variable Q value.
Läs mer
Liknande produkter
ZLOC4.4 Specifications
Speaker Input 4CH
Outputs 4CH
REM In Yes
REM Out Yes
Load Select 10-Ohm / 60-Ohm / 20K-Ohm
Ground Isolation GND/ISO/200-Ohm
Gain Yes,X2
Clipping Yes,X2
Center Frequency 20Hz-110Hz
Bass Level -9 ~ +9dB
Turn On Mode REM/DC/AUDIO
Input Mode 2CH/4CH
Remote None
Dimensions(LxWxH)mm 150.6x82x24.8mm
Chassis Body Aluminum
Operating Voltage
Input Sensitivity 0.5 to 32V
Operating Voltage 9 to 32V
Output Voltage Max. 7.5V @ 14.4V
Max 40V as Input Must be 20K-ohm load
Signal to Noise >100dB @6.4V output
Input Impedance 10-Ohm / 60-Ohm / 20K-Ohm
Frequency Response 10-30kHz
THD+N <0.01%
Output Impedance < 120-ohm
Max Current Draw 121 - 150 mA
Turn-On Trigger, DC 3 to 7V
Gain -28 to 0dB
Terminal Gauge Quick Connect / 16# AWG