Liknande produkter
Handmade in our Italian headquarters, the subwoofers are also customizable if requested.
In the new edition the main transformation was carried out on the magnet and coil, which together made it possible to reach a bearable power of 2000Wrms in both the D1 and D2 ohm impedance versions.
The impressive magnetic assembly now features a 220mm ferrite ring and "ufo" pole plates. This specific design of ours has allowed us to significantly improve power handling, ventilation and cooling of the voice coil, as well as giving an extremely modern and unique aesthetic look!
The new coil is 81 mm, 4 layers, with 100% pure copper winding, on a high temperature aluminum former.
The spiders, double layered in 100% red nomex, produced in our Italian headquarters, allow for extreme lightness, rigidity and efficiency, plus the sewn tinsel avoid annoying noises and vibrations on long excursions.
All 4 versions 10/12/15/18" are equipped with a new pressed cellulose cone and 30mm round foam suspension which, thanks to the greater cone surface area available, has made it possible to increase efficiency without losing anything in terms of of excursion.
Pneumatic rubber edge for a perfect pressure seal inside any box.
Push spring terminals to insert cables with sections up to 16mm2!
To complete everything we installed a carbon dust cover which, in addition to stiffening the cone, acts as a heat sink, as carbon, being a heat-conducting material, absorbs the heat of the coil and also helps to dissipate it from the front part of the cone.
************************************************** **********
All 4 models available 10"/25cm - 12"/30cm - 15"/38cm - 18"/46cm both double 1 ohm and double 2 ohm.
Their resonance frequency (Fs) between 33 and 36 Hz makes them perfect for everyday listening in the car, both with bass music and hip hop, as well as for lovers of techno and music with high BPM.
Given the 2000Wrms power, we recommend one of our 1500 to 3000Wrms amplifiers in combination.
We also remind you that for all Gs Audio speakers and subs built in our Italian headquarters we have available not only the standard recone kit, but also customized kits as needed, plus all the coils, spiders, cones and every component for the repair of the subwoofer/speaker without the obligation to purchase a new one.
General specifications
Outer diameter | 272mm |
Installation diameter | 240mm |
Mounting depth | 140mm |
Impedance | D1/D2 |
Power RMS | 2000W |
Max Power | 4000W |
Voice coil diameter | 3.2" |
Suggested box volume | 60L |
Suggested box tuning | 37Hz |
T/S Parameters D1
Qts | 0.366 |
Vas (L) | 15.80 |
Fs (Hz) | 34.32 |
Re (Ω) | 2.24 |
Mms (g) | 251.95 |
Xmax (mm) | 36 |
Qms | 6.134 |
Qes | 0.389 |
SPL (2.83Vrms) | 84.05 |
BL (Tm) | 17.70 |
Sd (cm2) | 381 |
T/S Parameters D2
Qts | 0.366 |
Vas (L) | 16.85 |
Fs (Hz) | 37.68 |
Re (Ω) | 3.55 |
Mms (g) | 198.2 |
Xmax (mm) | 38 |
Qms | 5.973 |
Qes | 0.389 |
SPL (2.83Vrms) | 85.9 |
BL (Tm) | 20.2 |
Sd (cm2) | 381 |