Produktbeskrivning
One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice. With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power. In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.
SPECIFIKATION
| Produktmodell | M-SERIES |
| Technical data | Output power RMS / max. - @ 4 Ohms 6 x 100 / 200 Watts - @ 2 Ohms 6 x 100 / 200 Watts - @ 1 Ohm - - bridged @ 4 Ohms 3 x 200 / 400 Watts - bridged @ 2 Ohms - Amplifier technology Class D Inputs 6 x RCA / Cinch 1 x Remote In Input sensitivity RCA / Cinch 0.5 - 6 Volts Input impedance RCA / Cinch 20 kOhms Input impedance highlevel - Outputs 6 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 30,000 Hz Bass boost - Highpass 15 Hz - 4,000 Hz adjustable Lowpass 40 Hz - 4,000 Hz adjustable Bandpass 15 Hz - 4,000 Hz adjustable Subsonic / HPF 15 Hz - 4,000 Hz adjustable Phase - Slope high- / lowpass 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 98 dB (A-weighted) Distortion (THD) 0.05 % Damping factor 100 Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 1,550 mA Fuse 2 x 35 A Maxi-fuse (APX) Additional features Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability Dimensions (H x W x D) 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06” |
